crypto-sdcard (“sbj” edition) testing

Unlocking and mounting encrypted SD-cards automatically

 
The necessary steps to prepare an SD-card are described at Together.Jolla.com (TJC).

crypto-sdcard solely protects "data at rest" on SD-cards, i.e. specifically when the device is locked or switched off (and the SD-card may be taken out), as the "key"-files reside unencrypted on fixed, internal mass storage of the device.

 
Notes:

• This edition is provided specifically for devices, which need to load Qualcomm's qcrypto kernel module in order to support modern cryptographic schemes as e.g. XTS, plus it is faster and more energy efficient.
  Only SailfishOS on the Jolla 1 (sbj) is known to provide and need the qcrypto.ko, hence currently it is the only device supported by the "qcrypto edition" (details).
  For all other devices, the regular edition shall be used.
• Do reboot before using crypto-sdcard.
• These RPM packages contain newer versions of the configuration files originally posted at TJC, which are now hosted at Github.
• "Key"-file path and names are:
  • For Cryptsetup LUKS:
    /etc/crypto-sdcard/crypto_luks_<UUID>.key
  • For Cryptsetup "plain":
    /etc/crypto-sdcard/crypto_plain_<device-name>.key
  • A specific "<UUID>" can be obtained by executing
    blkid -s UUID -o value /dev/<device-name>
    with e.g. "mmcblk1p2" as "<device-name>".
• For discussing the necessary preparation of SD-cards (i.e., partitioning and formatting them, plus the usage of Cryptsetup and creating "key"-files), please use the corresponding thread on TJC.
• For discussing crypto-sdcard's specific configuration files and its RPM packaging, please use its issue tracker at Github.
• Issues with these RPM packages or the configuration files they install shall also be filed at crypto-sdcard's issue tracker there.
• As this web-page at OpenRepos merely exists for describing and distributing the crypto-sdcard (qcrypto edition) RPMs, there is no need for issuing comments here.

 
Features:

• These configuration files do not alter, replace or delete any extant files.
• Support of encrypted partitions and whole devices.
• Support for (µ)SD-cards and USB-attached storage (if supported by device hardware and Operating System).
• Interoperable with SailfishOS GUI apps (see details).
• Support for Cryptsetup LUKS and Cryptsetup "plain".
  • Note that SailfishOS just recently (with v3.0.3) switched to Cryptsetup 2, and so did most (desktop) Linux distributions. For interoperability with extant Linux installations and commonality with SailfishOS before v3.0.3, which provide Cryptsetup 1.x (therefore only support LUKSv1 headers), the "partitioning guide" aims at creating LUKSv1 headers.
  • As Cryptsetup LUKS reads the cryptography parameters from the LUKS header and Cryptsetup 2 supports both v1 and v2 headers, crypto-sdcard shall work fine with any LUKS header version and parameters, which are valid for the installed Cryptsetup version.
  • For Cryptsetup "plain" (only to be used, when "plausible deniability" is a must), crypto-sdcard has to provide the cryptography parameters and uses "-h sha1 -s 256 -c aes-xts-plain" by default. While these parameters are optimised for speed, low power consumption, interoperability and sufficiently strong security for the next decade (including the specific use of SHA1 for hashing a pass-file down to 160 bits), other parameters may be set for unlocking Cryptsetup "plain" in /etc/systemd/system/cryptosd-plain@.service.
  • Since crypto-sdcard 1.3.4, the parsing of "key"-files in "plain" mode is enhanced (as an experimental feature).
    This change requires to convert extant "key"-files for "plain" mode.
    New "plain" "containers" shall be created slightly differently now, in order to take advantage of this enhancement.
• Start mounting encrypted (partitions on) SD-card via udisks at the earliest sensible time: Right after udisks2.service has started.
• Unmount before udisks2.service begins stopping, hence achieving a clean unmount.
• Since v1.3.4 the Systemd EnvironmentFiles mount-cryptosd-luks@.conf and mount-cryptosd-luks@crypto_luks_<UUID>.conf (in this order), respectively mount-cryptosd-plain@.conf and mount-cryptosd-plain@crypto_plain_<device-name>.conf, in /var/lib/environment/udisks2/ are evaluated for additional mount options, if they exist (one or both). Take a look at ls /dev/mapper/crypto* for the partition specific part (between the @ and the .conf extension) of the file names for the partition specific configuration files.
  These configuration files can be created by a system administrator (i.e., you), so if you want to add restricting mount options, see here for details.
• Ensure, that AlienDalvik begins starting after mounting succeeded, to allow for android_storage on SD-card.
  Even more importantly (i.e., also relevant for devices without "android_storage on SD-card") this also ensures, that unmounting occurs only after AlienDalvik has completely stopped.
  Nevertheless, these configuration files are also applicable to devices without AlienDalvik installed.
• Boot time is not significantly prolonged, as unlocking encrypted partitions per Cryptsetup occurs in parallel to starting udisks2.service; after both succeeded, all mount operations are also started concurrently.
• Versions below 1.0: Create / try to rectify the "compatibility symlink" in order to allow older apps seamlessly accessing encrypted (partitions on) SD-cards at their new (since SailfishOS 2.2.0) mount point.

 
License:
LGPL-2.1-only